Search results

Create the page "USB" on this wiki! See also the search results found.

Page title matches

• Qualcomm USB mode
  ...In this mode, the device identifies itself as Qualcomm HS-USB 9008 through USB, and can communicate with a PC host.
  244 bytes (37 words) - 19:00, 20 August 2018
• Samsung USB mode
  You can change the USB settings so that your phone will sync, charge, etc. when connected to a com 1. Plug the USB cable into the phone.
  962 bytes (168 words) - 10:08, 21 August 2018
• USB debugging mode
  USB Debugging Mode # From the DEBUGGING section, tap USB debugging to enable or disable.
  758 bytes (118 words) - 10:20, 21 August 2018
• USB-UART cable
  ...ble is a USB to serial converter cable which provides connectivity between USB and serial UART interfaces. | || [[File:Z3X UART USB+RJ45 CABLE.jpg|thumb|Z3X UART USB+RJ45 CABLE]] ||
  206 bytes (35 words) - 11:20, 18 December 2018

Page text matches

• Z3X-box
  # USB Hub to connect any USB device Tether the phone to the computer with a USB cable and run The Shell program that was just installed. The Shell will run
  4 KB (648 words) - 12:00, 10 March 2021
• Dictionary
  [[Qualcomm USB mode]] [[Samsung USB mode]]
  674 bytes (102 words) - 17:17, 27 May 2019
• Z3X Samsung Pro Dongle
  * Super fast USB flashing mode available for Agere phones
  4 KB (558 words) - 17:26, 14 October 2019
• MD5 file
  ...if it's bad). This includes moving from your computer to the phone, since USB is far from perfect.
  565 bytes (105 words) - 15:27, 10 August 2018
• EasyJTAG-box
  * Ability to run all Z3X software with box (PC/SC-CCID USB Reader onboard)
  2 KB (282 words) - 00:22, 1 November 2019
• Samsung Tool PRO Released ChangeLog
  Connect phone via usb(no need even root), enable ADB, press read codes. Nothing will not changed - added important function WRITE CERT VIA USB CABLE without root for cert based phones.
  66 KB (11,008 words) - 16:55, 8 November 2018
• EasyJTAG Classic Tool
  * NAND, OneNAND and eMMC storage devices are supported via USB interface ...H67A-D3-B3 motherboard with Core i5 CPU and with EasyJTAG Box connected to USB 2.0 port, located directly on motherboard.
  13 KB (2,141 words) - 21:46, 19 August 2018
• Qualcomm USB mode
  ...In this mode, the device identifies itself as Qualcomm HS-USB 9008 through USB, and can communicate with a PC host.
  244 bytes (37 words) - 19:00, 20 August 2018
• JTAG Unbrick Pocedure Step By Step Example (Samsung SGH-A897 No Power ON after flashing wrong firmware)
  Micro Usb Cable
  7 KB (1,221 words) - 18:43, 22 August 2018
• Z3X Server Credits
  # Connect the phone to PC via USB cable (no root required)
  9 KB (1,606 words) - 12:45, 10 March 2021
• Z3X Pandora Tool
  ...one connection and a power indicator light. On the other side is a ''micro USB socket'' for a computer connection. ...the package) and connect the power (POWER IN) of the adapter to the other USB connector of the adapter on the computer.
  6 KB (920 words) - 11:28, 27 April 2021
• EDL
  # Enable USB debugging on your Android device. # Open a command window on PC and connect your device to PC via USB cable.
  486 bytes (83 words) - 23:29, 21 August 2018
• Samsung USB mode
  You can change the USB settings so that your phone will sync, charge, etc. when connected to a com 1. Plug the USB cable into the phone.
  962 bytes (168 words) - 10:08, 21 August 2018
• USB debugging mode
  USB Debugging Mode # From the DEBUGGING section, tap USB debugging to enable or disable.
  758 bytes (118 words) - 10:20, 21 August 2018
• USB-UART cable
  ...ble is a USB to serial converter cable which provides connectivity between USB and serial UART interfaces. | || [[File:Z3X UART USB+RJ45 CABLE.jpg|thumb|Z3X UART USB+RJ45 CABLE]] ||
  206 bytes (35 words) - 11:20, 18 December 2018
• JTAG
  ...tion store can be updated very quickly from the development host via, say, USB. Using a serial UART port and bootloader to upload firmware to Flash makes ...solation]]. The adapter connects to the host using some interface such as USB, PCI, Ethernet, and so forth.
  48 KB (7,407 words) - 21:45, 19 August 2018
• EMMC
  ...image files. Via an MMC reader (typically a small box that connects via [[USB]] or some other serial connection, although some can be found integrated in ...microSD card with an SD adapter. The small memory card fits directly in a USB port while it also has MMC-compatible electrical contacts, which with an in
  15 KB (2,213 words) - 21:46, 19 August 2018
• ANDROID DEVICE PARTITIONS and FILESYSTEMS
  ...settings related tasks such as CID (Carrier or Region ID) information and USB configurations etc. functionfs - integrated with configfs, manages USB gadgets, ADB is implemented through functionfs on Android
  22 KB (3,673 words) - 16:19, 6 December 2018
• EasyJTAG 1 Generation
  * Usb Cable ( USBA 0.5m ) – 1.pcs * Usb Cable ( USBA 0.5m ) – 1.pcs
  1 KB (235 words) - 23:11, 15 October 2019
• EasyJTAG Accessories
  === E-MATE E-Socket BGA169E BGA162 eMMC + USB to MassStorage eMMC BOX === ...nclude 3 sockets for '''BGA169''', '''BGA162''' and '''Power Adapter PCB + USB''' to MassStorage BOX
  3 KB (463 words) - 23:27, 15 October 2019

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)