Difference between revisions of "Z3X-dongle"

From Z3X-TEAM
Jump to: navigation, search
 
Line 1: Line 1:
{{Under construction}}
+
[[File:Z3X-dongle.jpg|thumb|Z3X Dongle]]
 +
[[File:Z3x-replacement-smart-card.jpg|thumb|Z3X Activation Card]]
 +
=== About ===
 +
Z3X LG + Samsung Pro Dongle is an ultimate flashing, phone decoding, repair IMEI, and full-service tool for LG and Samsung.
 +
The device consists of a card reader and an activation key card. The appearance of the card reader may differ.
 +
=== Outstanding Features: ===
 +
* Agere, Sysol, Swift, Infineon, Analog Devices, Texas Instruments, MTK, SEMC, OMAP, and Qualcomm platforms are supported
 +
* Alphabetical phone model selection or selection by platform from Z3X Shell
 +
* Auto displaying information about required cable for each model selected
 +
* Auto displaying information if the phone must be connected with battery or without it
 +
* Smart Card firmware online update
 +
* Multilingual interface
 +
* Configuration files exchange between the users
 +
* Loading news from the server about updated versions and plans
 +
* Uses flash files in original format (only UMTS)
 +
* Works with swap PCB
 +
* Service features (Battery calibration/LCD contrast/RX TX, ... reset)
 +
* Automatic login to support area from Z3X Shell (Support Button)
 +
=== Supported Features: ===
 +
==== UMTS Module: ====
 +
* Reads phone info
 +
* Single-file flashing
 +
* High-speed flashing
 +
* Resets all types of locking
 +
* Bypass MSL and MSL2 security
 +
* IMEI repair*
 +
* "Phone freeze" repair
 +
==== SYSOL Module: ====
 +
* Flash writing/reading (NOR and NAND flash), writes flash to any address allotted for flashing
 +
* Erase/read/safe verify flash for any region or all flashes
 +
* EPROM read/write/auto restore
 +
* Writing IMEI and decoding in flash mode (no bypass MSL, no more bugs) supported for all present and future models
 +
* Visual calibration of battery settings
 +
* IMEI repair in SWAP without correct EPROM writing
 +
* Auto restore/save EPROM zone
 +
* Resets all locks
 +
* Writes BT (Bluetooth)
 +
==== SWIFT Module: ====
 +
* Flash writing/reading (NOR and NAND flash), writes flash to any address allotted for flashing
 +
* Erase/read/safe verify flash for any region or all flashes
 +
* EPROM read/write/auto restore
 +
* Writing IMEI and decoding in flash mode (no bypass MSL, no more bugs) supported for all present and future models
 +
* Visual calibration of battery settings
 +
* IMEI repair of the swap without correct EPROM writing
 +
* Auto restore/save EPROM zone
 +
* Resets all locks
 +
* Writes BT (Bluetooth)
 +
==== Agere Module: ====
 +
* Reads phone info
 +
* Flash read/write (flash soft in normal mode, difference mode, erase region settings)
 +
* Superfast USB flashing mode available for Agere phones
 +
* Erase/download/safe verifies flash (no use OptiFlash method) for any region or all flashes
 +
* Writes BT(Bluetooth), generates random BT address, and writes more data (s/n, HW ... )
 +
* PTE command processor: to use script files to add many operations by "One-click"
 +
* Repairs IMEI using PTE command (test mode), flash mode (generated EPROM), or calibration mode (new type EPROM)
 +
* All types of locks direct (fast) reset using PTE command or flash mode
 +
* Repairs IMEI of the swap PCB (for Authorized Service Center)
 +
* "Phone freeze" repairing
 +
* Repairing "Phone locked return for servicing", "Wrong Card"
 +
* FFS format without content file upload (for repair startup blink phone)
 +
* Operation with OTP: verify, write and lock (for Authorized Service Center only)
 +
==== Broadcom Module: ====
 +
* Flash reading/writing
 +
* EPROM reading/writing
 +
* Calibration data reading/writing
 +
* Reads network code
 +
* Resets all locks
 +
* IMEI repair
 +
==== TSWCDMA (3G Swift) Module: ====
 +
* IMEI repair
 +
* Write EEPROM
 +
* Decode
 +
* Read codes
 +
* Read EEPROM
 +
* Erase Full Flash
 +
* LGQ UMTS module:
 +
* Reads phone's info.
 +
* New and simple interface.
 +
* Easy model selection.
 +
* Single-file flashing.
 +
* Phone flashing.
 +
* NVM write/read.
 +
* Decode.
 +
* Fast country change.
 +
* Repair.

Latest revision as of 12:18, 2 April 2021

Z3X Dongle
Z3X Activation Card

About

Z3X LG + Samsung Pro Dongle is an ultimate flashing, phone decoding, repair IMEI, and full-service tool for LG and Samsung. The device consists of a card reader and an activation key card. The appearance of the card reader may differ.

Outstanding Features:

  • Agere, Sysol, Swift, Infineon, Analog Devices, Texas Instruments, MTK, SEMC, OMAP, and Qualcomm platforms are supported
  • Alphabetical phone model selection or selection by platform from Z3X Shell
  • Auto displaying information about required cable for each model selected
  • Auto displaying information if the phone must be connected with battery or without it
  • Smart Card firmware online update
  • Multilingual interface
  • Configuration files exchange between the users
  • Loading news from the server about updated versions and plans
  • Uses flash files in original format (only UMTS)
  • Works with swap PCB
  • Service features (Battery calibration/LCD contrast/RX TX, ... reset)
  • Automatic login to support area from Z3X Shell (Support Button)

Supported Features:

UMTS Module:

  • Reads phone info
  • Single-file flashing
  • High-speed flashing
  • Resets all types of locking
  • Bypass MSL and MSL2 security
  • IMEI repair*
  • "Phone freeze" repair

SYSOL Module:

  • Flash writing/reading (NOR and NAND flash), writes flash to any address allotted for flashing
  • Erase/read/safe verify flash for any region or all flashes
  • EPROM read/write/auto restore
  • Writing IMEI and decoding in flash mode (no bypass MSL, no more bugs) supported for all present and future models
  • Visual calibration of battery settings
  • IMEI repair in SWAP without correct EPROM writing
  • Auto restore/save EPROM zone
  • Resets all locks
  • Writes BT (Bluetooth)

SWIFT Module:

  • Flash writing/reading (NOR and NAND flash), writes flash to any address allotted for flashing
  • Erase/read/safe verify flash for any region or all flashes
  • EPROM read/write/auto restore
  • Writing IMEI and decoding in flash mode (no bypass MSL, no more bugs) supported for all present and future models
  • Visual calibration of battery settings
  • IMEI repair of the swap without correct EPROM writing
  • Auto restore/save EPROM zone
  • Resets all locks
  • Writes BT (Bluetooth)

Agere Module:

  • Reads phone info
  • Flash read/write (flash soft in normal mode, difference mode, erase region settings)
  • Superfast USB flashing mode available for Agere phones
  • Erase/download/safe verifies flash (no use OptiFlash method) for any region or all flashes
  • Writes BT(Bluetooth), generates random BT address, and writes more data (s/n, HW ... )
  • PTE command processor: to use script files to add many operations by "One-click"
  • Repairs IMEI using PTE command (test mode), flash mode (generated EPROM), or calibration mode (new type EPROM)
  • All types of locks direct (fast) reset using PTE command or flash mode
  • Repairs IMEI of the swap PCB (for Authorized Service Center)
  • "Phone freeze" repairing
  • Repairing "Phone locked return for servicing", "Wrong Card"
  • FFS format without content file upload (for repair startup blink phone)
  • Operation with OTP: verify, write and lock (for Authorized Service Center only)

Broadcom Module:

  • Flash reading/writing
  • EPROM reading/writing
  • Calibration data reading/writing
  • Reads network code
  • Resets all locks
  • IMEI repair

TSWCDMA (3G Swift) Module:

  • IMEI repair
  • Write EEPROM
  • Decode
  • Read codes
  • Read EEPROM
  • Erase Full Flash
  • LGQ UMTS module:
  • Reads phone's info.
  • New and simple interface.
  • Easy model selection.
  • Single-file flashing.
  • Phone flashing.
  • NVM write/read.
  • Decode.
  • Fast country change.
  • Repair.