JTAG Unbrick Pocedure Step By Step Example

From Z3X-TEAM
Revision as of 18:40, 22 August 2018 by Nonamegsm (talk | contribs) (Created page with "WHILE THIS IS VERY LIKELY TO WORK FOR ANY BOOTLOADER/MODEM/FIRMWARE BRICKED PHONE, THERE IS NO UNCONDITIONAL GUARANTEE THAT THIS WILL WORK FOR YOUR PARTICULAR SITUATION, THERE...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

WHILE THIS IS VERY LIKELY TO WORK FOR ANY BOOTLOADER/MODEM/FIRMWARE BRICKED PHONE, THERE IS NO UNCONDITIONAL GUARANTEE THAT THIS WILL WORK FOR YOUR PARTICULAR SITUATION, THERE IS A POSSIBILITY THAT THERE ARE SOME BRICK STATES THAT THIS WILL NOT WORK FOR, but in my experience, almost all cases can be resolved by rewriting the sdcard with correct partitioning.

Disclaimer out of the way, let us begin.

Needed Materials and Files:

EDIT: if you have another phone or know someone else with the same phone have them run this and the output will be a debrick image you can use: busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=200 if it does not work then change the last number (count=) to something larger and try it. If you create an image please upload it so I can put it into a repository I'm creating


16GB or 32GB class10 microSD card A hard bricked Samsung galaxy S3 US Cellular The debrick image for your device:

Here is the drive image for a folder containing all the debrick images that I currently have uploaded, more will be coming: https://drive.google.com/folderview?...XM&usp=sharing If you have any images that I missed, please send me a link or, better yet, upload them to drive, make them publicly shared, and share them with me at dreamwavedevteam@gmail.com, I will put them in this folder for all to use US Cellular R530: ftp://sdbruington.us/d2usc/SCH-R530_...200MB_16GB.bin Sprint L710: http://www.mediafire.com/download/23...ph_l710.img.xz AT&T I747: http://d-h.st/iEy T-mobile T999: http://www.mediafire.com/download/gr...k_SGH-T999.img

---I did not upload these images, I have simply collected the links over time, please thank Cnexus for his help in finding these and ---helping me to originally unbrick my S3

Your computer A card reader that will accept the card (another phone will not work as this is an image, and it needs to repartition the SD card) Either a partition editor (I've heard that you can use dd or something on linux, but I haven't tried) or this: win32diskimager-v0.9-binary.zip A wall charger (computer charging isn't as reliable)

Procedure:

1. Take the sdcard and insert it into your computer 2. Download the mentioned image and the software to put it onto the sdcard 3. Use your computer to pull the data already on the card onto your computer hard drive, as the sdcard will be wiped when the image is put onto it 4. use the software that you downloaded earlier to burn the image to the sdcard 5. Remove the battery from the SGS3 6. insert the sdcard into the S3 7. Put the battery into the S3 8. The S3 may boot automatically, or you may have to manually boot it by holding down the power button for 5< seconds 9. If the update that bricked your phone also messed up /system, then you'll have to coerce Odin mode to shove a stock firmware image to your phone, though I've had more than just SOME trouble with that in the past (in other words I haven't been able to get back to stock yet...), if you simply had a radio update or something go wrong, then proceed to the next step. 10. Do a victory dance with your phone in your pocket not the repair bench, or on second thought, make sure you don't drop it, don't create another problem. 11. After that, you can just use your device normally with the sdcard in it without worry of bricking it, though it will not be able to boot if you remove the sdcard; the only known method of getting it to boot without the sdcard is reflashing stock firmware, which completely wipes the phone and resets everything back to complete stock. Also, Odin mode has, at least for me, objected when I've tried to flash the stock image back onto it, and even if Odin mode was sure of working, backing up ~16GB of data isn't a fast process, especially with the most reliable means being ADB. If you try to flash a stock image and it fails, your device will almost definitely come up with a version of dmode when you try to turn it on with the sdcard (still bricked otherwise) that says something about Kies update failure, the only way of correcting this that I've had success with is flashing an image that won't do much, such as the same recovery that you already had, over odin mode from that special dmode, as while that won't correct the actual brick, it will at least make you able to boot from the sdcard again. I will provide links to the stock images in a little while, once someone gets that far, as I will have to find all but the one from the US Cellular version. I am currently looking for firmware images that will only flash the bootloader/modem, if anyone knows of an odin file that could do that, please let me know as soon as possible, in the meantime, I will try and create an update.zip that will flash the necessary files; as most bricks are likely cause by an update.zip that was meant for a different device, I am very confident that it can be fixed with another .zip file.---Stay tuned!


---Don't forget, that thanks button won't bite your finger off if you push it

If any of the links are not fully functional, PM me to let me know, and if you have the link to another debrick image for another device, send me the link so I can include it here!

Please note: While there is a similar procedure for Xynos based S3's, they apparently require a physical modification that requires an amount of soldering, so it is most likely best for them to simply take them in for Jtagging and then just not brick them after that.


EDIT: here is the link to a full youtube tutorial that I made, just for those of you who like watching a video instead of getting lost in a written guide https://www.youtube.com/watch?v=-RTAbLBVfMI

EDIT AGAIN: I'm sorry about both of the mediafire links being down, I will try and find some more and upload them to my google drive, along with the others just to make sure they exist somewhere safe.I'm downloading the images now and uploading some that I already have, they will be available in this folder (https://drive.google.com/folderview?...XM&usp=sharing) on google drive and will be available by email upon request here is a sprint image that should work, sorry I haven't tested it http://www.mediafire.com/download/23...ph_l710.img.xz for the t999 4.1: https://www.copy.com/s/xSAswQZbhQX8/t999_debrick.zip for the t999 4.3: https://www.copy.com/s/7ICfKXMC3ccr/....3_debrick.zip I know this is becoming a mess of links but here is a link to an xda post that has t999 variant images http://forum.xda-developers.com/show....php?t=2439367 here is a sprint 4.4 debrick image: http://www.androidfilehost.com/?fid=23329332407591176

If you want to get your phone to operate without an sd card in there for every boot, stay tuned, I'll have a guide to return to stock soon, though a quick google search shouldn't be that hard if you're desperate

I will clean up this guide in a little bit but currently I have school and such to attend to so it may not be immediate

I know this is getting unwieldy but (big thanks to youdoofus) I have a way to completely debrick and fix it so it doesn't require even the sd to boot.

"Restoring stock bootloader 1) You were able to boot into the ROM 2) Plug your phone into a computer and use MTP mode 3) Move the debrick file onto your internal sdcard (/sdcard/debrick.bin) 4) Disconnect your phone 5) Open up a Terminal Emulator on your phone and input this code

Code: su dd if=/sdcard/debrick.bin of=/dev/block/mmcblk0


6) Reboot" Of course this should be modified for the different versions and types of debrick image as some are img, some are bin, I think there might even be an ISO hanging around somewhere


EDIT: As of October 10th I'm working on a tool that will get an image directly from a stock rom/tar and put it on the SDcard. This is pretty complex so it will probably take a little while, but it should make it easier to get images if all that's required is a stock tar.