Difference between revisions of "Freeze code"

From Z3X-TEAM
Jump to: navigation, search
(Created page with "When trying to enter an unlock code, the message "Phone frozen" is displayed. <br> This means that the wrong unlock code has been entered too many times, which results in "fre...")
 
Line 1: Line 1:
When trying to enter an unlock code, the message "Phone frozen" is displayed. <br>
+
When trying to enter an unlock code, the message '''"Phone frozen"''' is displayed. <br>
This means that the wrong unlock code has been entered too many times, which results in "freezing the phone", otherwise known as being bricked.<br>
+
In this case, you will need a '''Freeze code (MCK code)''' to solve the problem of freezing the message on your phone. <br>
In this case, you will need a defrosting code (MCK code) to solve the problem of freezing the message on your phone. <br>
+
 
To input the defreeze code:
+
'''MCK = DEFREEZE = Defrost''' - various designations for the "defrosting" code, which are necessary if you have entered an incorrect unlock code (NCK=Network Lock=PIN) by mistake and the device does not accept the correct code. This is not an unlock code - it is a so-called "reset code". After entering this code, the phone will display the message "successful" and then ask you to enter the unlock (NCK=PIN) code again. <br>
 +
 
 +
It is important to note that Samsung phones do not have a menu where you can check the number of unlock code attempts. Therefore, if you have a used device in your hand, it is impossible to know whether unlock codes have been entered before or not.
 +
 
 +
P.S. NETWORK PUK code = freeze code.
 +
 
 +
To input the freeze code:
  
 
# Switch on the phone with an unaccepted SIM card.
 
# Switch on the phone with an unaccepted SIM card.
Line 10: Line 16:
 
# The phone will ask for the Network lock code
 
# The phone will ask for the Network lock code
 
# Enter it from your Samsung Tool software.
 
# Enter it from your Samsung Tool software.
# The phone will be unfreeze and unlocked
+
# The phone will be unlocked
  
 
This should successfully solve your phone freeze problem and unlock your Samsung phone to any GSM network.
 
This should successfully solve your phone freeze problem and unlock your Samsung phone to any GSM network.

Revision as of 13:32, 8 November 2019

When trying to enter an unlock code, the message "Phone frozen" is displayed.
In this case, you will need a Freeze code (MCK code) to solve the problem of freezing the message on your phone.

MCK = DEFREEZE = Defrost - various designations for the "defrosting" code, which are necessary if you have entered an incorrect unlock code (NCK=Network Lock=PIN) by mistake and the device does not accept the correct code. This is not an unlock code - it is a so-called "reset code". After entering this code, the phone will display the message "successful" and then ask you to enter the unlock (NCK=PIN) code again.

It is important to note that Samsung phones do not have a menu where you can check the number of unlock code attempts. Therefore, if you have a used device in your hand, it is impossible to know whether unlock codes have been entered before or not.

P.S. NETWORK PUK code = freeze code.

To input the freeze code:

  1. Switch on the phone with an unaccepted SIM card.
  2. The message "Phone is frozen / SOS" appears on the screen.
  3. Type the unfreeze code (Nothing will show on screen)
  4. Press the Enter button
  5. The phone will ask for the Network lock code
  6. Enter it from your Samsung Tool software.
  7. The phone will be unlocked

This should successfully solve your phone freeze problem and unlock your Samsung phone to any GSM network.